 |
|
|||||||||||
|
To start device supervision in 5 minutes, please perform the following steps: |
|||||||||||
Step 1 (Installation) |
|||||||||||
|
On a Windows 2000/XP(Home or Pro)/2003/ Vista machine, execute the “Enterprise Power Manager” package under an administrator account. Note: If you use Windows XP Service Pack 2 or a Network Management System, please refer to the pre-requisites. |
|||||||||||
|
Step 2 (Configuration) |
|||||||||||
|
From the Settings -> Auto discovery page, click on the Discover button. With this quick scan operation, you will discover within a few seconds: > Network Management Cards ref 66074 & 66244 & 66102 /BA > Network Shutdown Module V3 For the other devices, please perform the discovery based on IP address ranges |
|||||||||||
|
|||||||||||
|
Step 3 (Optional configuration recommended for large installations) |
|||||||||||
|
In the Settings-> Groups page, create one or severalpower device groups. In the Settings-> Power Device page, assign the discovered devices to the previously created groups. In the Settings-> User Accounts page, assign the access rights through “login and password” |
|||||||||||
|
Step 4 (Operation) |
|||||||||||
|
The Status tab allows you to supervise the current state of the compatible power devices. The Report tab allows you to view the device events. For these 2 tabs, the left tree allows you to access information device by device or group by group. |
|||||||||||
|
|||||||||||
