The Next Generation in AC Telecom Power
| MGE's Power-Invert S4 N+1 scalable DC to AC inverter
is the latest addition to the Power-Invert line recognized as the
industry standard for critical AC power by many of the world's leading
telecom companies.
SCALABILITY: Scalable 3.5 kVA inverter power modules can
be stacked in a N+1 redundant configuration (paralleled for redundancy
or capacity) up to 21 kVA.
OPTIMUM AVAILABILITY: All modules are packaged into a "hot
swap" receiver cabinet with an integrated maintenance bypass
allowing rapid and safe exchange of any component without interruption
to the critical load. |
|
|
NEBS STANDARDS: The S4 is one of the only inverters designed to
meet NEBS standards assuring compatibility with all devices in a telecom
environment.
RELIABILITY: Redundant microcontrollers feed control signals to
each inverter along a dedicated and isolated control line resulting in
an MTBF greater than 99 years.
TELECOM GRADE FILTERING: High-end power filters limit ripple current
on the DC bus to a negligible 32 dB, preventing micro-cycling of the battery.
EMI filters regulate conducted and radiated interference that could potentially
create noise disturbances. This high grade filtering is unique to the
S4 making it the best choice for telecom environments.
The S4 is available with the following optional
accessories, all of which can be factory installed on an open frame relay
rack, providing a ready to install inverter system.
Maintenance Bypass: Safely and seamlessly transfers the output to
an alternate AC source (utility power or protected AC power from another
inverter or UPS system) allowing the inverter to be shut-down or removed
without interrupting power to the critical loads. The Maintenance Bypass
assembly is factory wired to the inverter module when ordered as a system.
AC Distribution Panel: The AC distribution panel accommodates 20
single pole breakers and is available in 120 and 240 VAC versions. 10
x two pole breakers can be used if distribution alarm monitoring is required.
Web Based Monitoring: The Falcon monitoring system (1.75"
high rack mounted) provides inverter, maintenance bypass and AC distribution
status and alarms over a closed network or via the Internet serving up
web pages that can be viewed with a standard browser or via SNMP or dial
up access. Accessories include environmental monitoring modules and auxiliary
inputs to monitor other devices such as leak detection systems, room security
or any other dry contact status points.
Open Frame Relay Rack:
All components can be mounted on an industry standard open frame relay
rack with the entire inverter plant certified for zone 4 seismic installations.
Conduit Junction Boxes: (not required when mainstream bypass is
used) Larger inverter modules such as the 14 kVA through 21 kVA require
substantial cable gauges. The conduit junction box is factory mounted
to the back of the inverter module, easing conduit landing requirements
and simplifying installation of rear or side mounted cable entry systems.
Download S4 Inverter Configuration
Software
Note : The InverterSetup.ini and InverterSetup.exe
files should be loaded in the same folder
 |
|
|
MGE UPS SYSTEMS |
|
|
|
North America
