> HTTP/XML Card for Web-based UPS monitoring
> 10/100 Mb Ethernet connection
> Unique features:
- High Security level through SSL
- Advanced display for 3-phase UPS monitoring
- Alarm notification to the browser (MSIE, Netscape Navigator,...)
- Can be combined with XML-Clients to Shutdown up to 50 servers per card.
-> tell me more...
 JBus/ModBus
66061 |
 |
Connects the UPS to a building management system via a JBus/ModBus network.
The user manual (pdf, 500 Ko, English/French)
USB
66067 |
 |
This card has one USB communication port, on which can connected:
> one monitoring software included in Solution-Pac
> one Power Management software as the Power Management of Microsoft Windows 2000.
The user manual (pdf, 590 Ko, English/French)
Volt free contact and Remote Power Off
66068 |
 |
This card has two DB9 ports.
One Basic port:
- provides UPS status via voltage free contacts (AS400 type)
- monitors a remote power off signal, compatible with Power Management from Windows NT.
One Remote Power Off/Basic port:
- monitors a remote power off contact
- or operates as the Basic port
The Basic status information are as follows:
- Battery fault,
- Operation on mains (not on battery),
- Operation on automatic by-pass,
- Low battery,
- Load protected
The user manual (pdf, 1,1 Mo, English/French)
Management Card Contact / RS232 Serial
66104 |
 |
This card provides one com port that may be configured for:
- Basic Status information via voltage free contact
- Serial RS232 port : Lets you use the advanced functions of Solution-Pac 2
- Manage a UPS remote power off
Installation manual (pdf, 400 Kb) |
|
> Combine SNMP + Web extended supervision capabilities
> 10/100 Mb Ethernet connection
> Can be combined with MGE monitoring / supervision / shutdown solutions:
- Solution-Pac
- Management Pac
--> tell me more ...
Dual U-Talk Card
66060 |
 |
Provides two communication ports that may be configured for:
> U-Talk (serial link): Lets you use the advanced functions of Solution-Pac and Management-Pac power management software.
> Basic (AS400-type dry contacts): A simple means to forward the following UPS information to a remote location: load on battery, load on bypass, low battery shutdown warning, load powered by UPS.
The user manual (pdf, 260 Ko, English/French)
Dual SHUT Card
66066 |
 |
This card has 2 independent RS232 communication ports, on which can be connected:
- one monitoring software included in Solution-Pac,
- one remote control panel UPScontrol.
The user manual (pdf, 874 Ko, English/French)
Alarm relay
66069 |
 |
This card:
- Controls six output relays depending on the operating status of the UPS.
- Receives signals on the two SELV imputs (this function is available only in the progamme mode).
The following information is transmitter:
- relay 1: General alarm,
- relay 2: Battery fault,
- relay 3: Load protected,
- relay 4: Load on automatic by-pass,
- relay 5: Load on battery power,
- relay 6: Low-battery warning.
The user manual (pdf, 496 Ko: English, French)
Network Management Card MiniSlot
66102 |
 |
These cards are recommended for central UPS systems that protect a complete network or for UPS systems providing back-up for critical equipment.
With its embedded card, the UPS has its own IP address with local intelligence to:
> access Web pages with reports, settings and alarms;
> interface with SNMP-based network management consoles;
> communicate with shutdown software installed on the servers to be protected.
|
North America
