Rated power (Pn) in kVA
(power factor 0.8) |
160 |
200 |
| UPS input (mains 1) |
| Voltages |
380 V - 10% (option
- 15%) to 415 V + 15 % 3-phase
On request: 208 V, 220 V and 480 V |
| Frequency |
50
or 60 Hz +/- 10% |
| Power factor |
0.95 with filter |
| Distortion |
THDI < 4%
with THM filtering |
| Bypass input (mains 2) |
| Voltages |
380, 400 or 415
V +/- 10 % 3-phase + neutral
On request: 208, 280 or 480 V |
| Frequency |
50 or 60 Hz
+/- 10% |
| UPS output |
| Steady-state voltages |
380, 400 or 415
V +/- 3%, 3-phase + neutral
On request: 208, 220 or 480 V |
| Frequency |
50 or 60 Hz +/-
0.5 Hz |
| Synchronisation range with bypass |
0.25 to 2 Hz
in 0.25 Hz steps |
| Voltage transients (dynamic performance) |
+/- 2 % for load
charge of
0 % to 100 % and 100 % to 0 % |
| Permissible overload duration |
125% for 10 minutes,
150% for 1 minute |
| Short-circuit current capacity without transfer
to bypass |
Peak current
> 2.33 In for 1 sec |
| Distortion on linear loads at Pn |
THDU Ph/Ph <1.5%,
Ph/N < 2% |
| Distortion on non-linear loads at Pn |
THDU Ph/Ph <2%,
Ph/N < 3% |
| Battery |
| Back-up time |
8, 10, 15, 20,
30 and 60 min, other values on request |
| Types |
Sealed lead acid
(service life 5, 7 and 10 years), vented lead acid, Nickel Cadmium
|
| Voltage |
Floating: 423
to 463 V |
| Voltage regulation |
Temperature correction |
| Overall UPS efficiency at
In |
| Normal mode (%) |
92.5 |
92.5 |
| Eco mode (%) |
97 |
97 |
| Temperatures |
| UPS Operation |
- 5° C to
+ 40° C, 40° C for 8 hours maximum |
| Storage |
With battery:
- 20° C to + 45° C,
Without battery : - 20° C to + 70° C |
| Battery operation |
Optimum between
+ 15° C and + 25° C
The life of sealed is halved for each 10° C above this range |
| General specifications |
| Accoustic Noise (dBA) as defined by ISO 3746 |
67 |
68 |
| Standards |
| Design
& performances |
IEC 146, ENV
50091-3 |
| Safety |
EN 50091-1,
IEC 60950 / EN 60950 |
| EMC |
EN 50091-2,
IEC 61000-2-2, IEC 61000-3-5, IEC 61000-4 |
International
