High power quality
The Galaxy 5000 range supplies clean stable power to sensitive loads to ensure
 Optimum operation.
Extended life.
Advanced architecture
On-line double conversion supporting the load whether the mains is present or not.
DSP PWM control with variable pulse width and frequency.
The latest compact IGBT Sixpack technology.
Output voltage total harmonic distortion (THDU) less than 2%.
Flexibility: upgrading along with continuity of service
Customer’s power demands, types of load to be protected and backup times needed are always changing, Galaxy 5000 range is extremely flexible.
Paralleling of up to 6 modules for higher power or redundancy.
A choice of backup times from 5 minutes to 8 hours.
Many different architectures with Upsilon STS.
Compatible with inductive and leading power factor loads.
Numerous options can be added to the UPS module (lightning arrestor, backfeed protection,etc.).
Reduced total cost of ownership
The Galaxy 5000 is designed to minimise infrastructure costs:
Small footprint with built-in batteries up to 80kVA rating.
Input current total harmonic distortion (THDI) less than 3% avoiding oversized cabling, circuit breakers and generator set.
The Galaxy 5000 reduces operating costs:
The efficiency in on-line double conversion mode is up to 94% and during economy mode the efficiency can reach 97%, reducing your utility bill.
High power availability
The Galaxy 5000 has been designed for non-stop, 24/7 operation.
Fault tolerance with built-in automatic and manual bypass.
Very low component count and redundant cooling for higher reliability.
High overload and short-circuit capacities to improve down stream circuit discrimination.
Battery backup time assured by the Digibat battery management system.
Safe and easy to use
The Galaxy 5000 has an intuitive man / machine interface making it easy to control.
Large, high definition display (120x93mm, 320x240 pixels).
Animated mimic display.
2500 event logs.
Remote supervision compatible with a wide range of building and network management systems.
|
|
Easy to maintain
MGE maintenance engineers have played an active role in designing the Galaxy 5000 range to ensure that maintenance and troubleshooting is faster and safer.
All components are accessible with greater ease.
Life cycle monitoring system for preventive maintenance.
Communications
The Galaxy 5000 range can be connected to all type of networks.
To communicate the UPS status.
To shut down the operating systems of the servers connected, automatically in a controlled manner.
To be supervised as part of a group of UPSs.
Standard features
On-line double conversion architecture (EN50091 Voltage and Frequency Independent UPS) with built in static switch and maintenance by-pass.
IGBT charger with power factor correction for low input current total harmonic distortion.
Soft start, walk-in charger for compatibility with generator sets.
Up to 8 hours backup time.
Can start without mains (cold start).
Batteries built-in up to 80kVA.
Circuit breaker for deep discharge protection.
Redundant cooling on secondary source.
Modular paralleling.
Sequential start-up of UPSs (in parallel configuration) to reduce genset size.
Multilingual graphic display.
LED overview.
2500 event logging.
Emergency stop (EPO).
Delivered with one programable alarm relay card for remote indication.
Available options
Eco operating mode.
Parallel communication cards (up to 6).
Monitoring and shutdown software.
Isolation transformer.
Top cable entry.
Harsh environment Kit.
B1000 or Cellwatch, block cell battery monitoring.
Management of 2 battery circuit breakers.
Backfeed protection for mains 1 and/or mains 2.
Lightning arrestor.
EMC : C2.
Synchronisation module.
Total fan redundancy and failure detection.
|
International
