|
|
| Related links |
 |
|
|
|
 MultiSlot
Comprehensive,  flexible
and upgradable communication for your UPS
- Expansion module for com cards
- Protocol converter
- Data concentrator for interconnected UPSs
Volt
free contact & Remote Power Off Card
PN:66068 (1) |
 |
This card:
- provides Basic status via voltage free contacts
- is compatible with IBM iSeries/AS400 and Windows power management
- monitors a remote power off signal
The Basic status information are as follows:
- Battery fault - Operation on mains - Operation on automatic by-pass
- Low battery - Load protected
The
user manual (pdf, 1.1 Mb, English/French)
PowerServices
TelPac Card
PN: 66096(1)
|
 |
With PowerServices TelPac card or PowerServices TelPac module you
provide a complete MGE devices conection via an internal high speed
analog modem.
These card and module are only proposed with our Teleservice RTC service.
->
tell me more...
-> The installation manual (pdf, 750 Kb, English/
French)
JBus/ModBus Card
PN: 66061 (1) |
 |
Connects the UPS to a building management system via a JBus/ModBus network.
The user manual (pdf, 500 Kb, English/French)
|
|
 UPScontrol
Remote monitoring for your UPS
- Display of measurements
- Display of operating mode - History
- Alarm messages
- Selection of language for display
Management Card Contact / RS232 Serial 
PN: 66104 (2) |
|
This card provides one com port that may be configured for:
- Basic Status information via voltage free contact
- Serial RS232 port : Lets you use the advanced functions of Solution-Pac 2
- Manage a UPS remote power off
Installation manual (pdf, 400 Kb: English/French)
Alarm
relay Card
PN: 66069 (1)
|
 |
This card:
-
Controls six output relays depending on the operating status of the
UPS.
- Receives signals on the two SELV inputs (this function is available
only in the progamme mode).
The following information is transmitted:
- General alarm - Battery fault - Load protected
- Load on automatic by-pass - Load on battery power - Low-battery
warning.
The
user manual (pdf, 496 Kb: English/French)
U-Talk/Basic Card
PN: 66060 (1) |
 |
Provides two communication ports that may be
configured for:
> Serial/RS232 Port (U-Talk):
Lets you use the advanced functions of Solution-Pac 2.
> Basic (AS400-type dry contacts):
A simple means to forward the UPS information to a remote location
The
user manual (pdf, 260 Kb, English/French |
(1) Cards compatible with :Galaxy 3000, Galaxy 5000, Galaxy PW, (Comet 3000 & Galaxy 6000 through Multislot)
 |
|
|
MGE UPS SYSTEMS |
|
|
|
International
